Brand Eleaf
Codice Prodotto: 34
Disponibilità: Disponibile

Opzioni disponibili

Eleaf iStick QC Battery 200W - 5000mAh

Eleaf iStick QC Battery 200W - 5000mAh


Product Introduction:

The iStick QC 200W comes with a massive 5000mAh built-in battery and has a powerful 50A/200W maximum output. Stylish,

sustainable and powerful, the iStick QC 200W also features a cell balancing trickle charge system and a 1.5A quick charge capability

when using the Avatar Quick Charger. The innovative RC adapter (optional accessory) will convert the iStick QC 200W’s 510 connection

into a USB output for Power bank mode when necessary. 



Size: 52mm*25mm*83mm
Battery capacity: 5000mAh
Thread type: 510 thread
Output wattage: 1-200W
Weight: 195g
Output voltage: 0.5-9V
Maximum charging current: 1.5A
Maximum output current: 50A 
Output mode: VW/Smart/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance range: 0.05-1.5ohm (TC modes)
          0.1-3.5ohm (VW/Smart mode)
Temperature range: 100-315℃/200-600℉(TC modes)
Color: green, red, brown, black, silver, wood grain
Standard configuration:
  1×iStick QC 200W    1×QC USB Cable    
  1×User Manual






Long-lasting Battery Life

The iStick QC 200W comes with a massive 5000mAh built-in battery,
which will last you a rather long time of vaping.
Featuring the Cell Balancing Trickle Charge System

A cell balancing trickle charge system is adopted in the iStick QC 200W to bring the internal batteries to the equal level charge,
which also ensures high security in charging.
Preheat Function & Different Switchable Interfaces
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. The iStick QC 200W also has four switchable display interfaces, allowing you to choose the interface you are most accustomed to.
High Compatibility

With a width of 25mm, the iStick QC 200W can handle all tanks up to 25mm diameter without any overhang.
Dual Circuit Protection

The circuit protection system has both software and hardware battery 
protections of over-charging, over-current and over-discharging.
Functions of Micro USB Port
Charging: simply plug the iStick QC 200W in to a computer or a wall adapter to charge.
Firmware upgrading: the firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable. 


Scrivi una recensione

Accedere o registrarsi per recensire